Alcatel SPEED TOUCH 710, Руководство пользователя

Страница: 167 / 254

Adding specific routes
to the 'IP route' table
Criteria for a route to
be valid
13 Networking - IP
167 / 254
3EC 17605 AAAA TCZZA Ed. 02
Proceed as follows:
1. Enter the following route information:
'Destination' IP address (pool) of the destination or
nexthop" device in prefix notation
Specifying
default
indicates that all outgoing traffic is
sent over this route.
'Source' IP address (pool) in prefix notation
Specifying
any
indicates that all traffic coming from the
Ethernet interface is sent over this route.
'Gateway' IP address of a directly connected gateway
device, e.g. the AST710 itself.
2. Click . As a result the route is applied.
3. Click to store the routing configuration to
permanent storage.
A route is only accepted by the AST710 if it meets following
conditions:
The destination and source entries must yield correct prefixes
The gateway must be directly connected.