Alcatel SPEED TOUCH 710, Руководство пользователя

Страница: 199 / 254

The PingofLife

procedure
18 Maintenance - Speed Touch ToDefaults
199 / 254
3EC 17605 AAAA TCZZA Ed. 02
Proceed as follows:
1. Turn off the AST710 .
2. Open a commandline (DOS) window (Windows OS), or a
terminal window (UNIX, Linux) on a PC.
3. At the command prompt execute:
arp –a
This allows you to overview the current entries in the ARP
cache.
4. Add a static entry to the ARP cache, according to following
syntax:
arp –s <AST710 IP address> 01–90–D0–80–01–01
<AST710 IP address>
is a placeholder for the IP address
to be assigned to the AST710 . It can be any address within
your subnet as long as it is not used by any other member of
your local network.
5. To verify whether this step was successful execute
arp –a
a
second time.
In the entries list, your
arp –s
command entry should be
added.
6. Initiate a continuous pinging, by executing following
command:
ping –t <AST710 IP address>
7. Turn on the AST710 .
8. After the AST710 finished its POST, it will configure the IP
address
<AST710 IP address>
you are pinging.
9. You must clear the entry in the ARP cache by issuing
the following command:
arp –d <AST710 IP address>
10. Verify connectivity by pinging the AST710 a second time:
ping <AST710 IP address>
The AST710 should reply.
11. Browse to the AST710 pages and click to make the
new IP address permanent.