Alcatel SPEED TOUCH 710, Руководство пользователя

Страница: 55 / 254

Bridging configuration
Using Bridging
7 Configuration and Use - Transparent Bridging
55 / 254
3EC 17605 AAAA TCZZA Ed. 02
7.2 Using Bridging
Per default, following Bridging entry is preconfigured:
Br1 (Bridge on 8.35)
This entry is disabled per default. To enable it change its state into
 forwarding" on the ' Bridge ' page.
In case this Bridging entry does not meet your requirements, you
can configure a new one as follows:
1. If needed, add a Bridge phonebook entry with the correct
VPI/VCI on the 'Phonebook' page.
2. On the ' Bridge ' page, select this phonebook entry from the
'Bridge port ' popdown list.
3. For this entry, select the correct encapsulation method.
4. Click .
See section 7.3 for more information.
Make sure your AST710 is turned on first.
Turn on your PC(s), start your Web browser and you are on the
Internet or have Corporate Intranet access.
Although the access method of the bridge is 'Alwayson', the
remote organization might ask for a username and password.