background image

Introduction

Advanced routing

In this subsection

'Routing' box

10 Configuration and Use - PPP & IP Routing

94

 / 254

3EC 17605 AAAA TCZZA Ed. 02

10.4.3

IP Routing Related Configurations

If a PPP session is opened successfully (either manually by the user,

triggered by LAN traffic, or automatic at boot time), routes are

automatically added to the 

AST710

's routing table.

The settings in the PPP's 

'IP Routing'

 input box, are reflected in the

routing table.

For advanced users, the 

AST710

 allows manual configuration of

routes to dedicated destinations.
See section 13.5 for more information.
Moreover, routes can be configured via the CLI, which will only be

added to the IP route table upon establishing the PPP connection.
See chapter 20 for more information on the CLI.

'Routing'

 box

Connection Sharing

Connection Sharing Subnet Values

'My net only' Configuration

Destination Networks

Destination Networks Subnet Values

Primary and Secondary DNS Server.

The following figure shows the 

'Routing'

 input box:

Содержание SPEED TOUCH 710































































































































































































































































Отзывы: