Alcatel-Lucent OmniAccess AP60 Скачать руководство пользователя | Manualshive

Страница: 36 / 68

background image

OmniAccess AP60/61: Installation Guide

32

Part 031643-00 Rev. 01

June 2005

Using the Optional Mounting Kits

Use the optional mounting kit to attach the OmniAccess AP60/61 to a wall,
shelf, or ceiling. For installation, see the

OmniAccess AP60/61 Mounting Kit

Installation

Notes

(P/N 031641-00) provided with each kit.

Connecting Required Cables

The OmniAccess AP60/61 Access Points with or without external antennas
are intended only for installation in Environment A as defined in IEEE 802.3.af.
All interconnected equipment must be contained within the same building,
including the interconnected equipment's associated LAN connections.

Selecting an FE Cable

The 10/100 Mbps Ethernet (FE) port is used to connect the AP to a
10Base-T/100Base-TX (twisted-pair) Ethernet LAN segment. The appropriate
FE cable depends on the features required of the FE port:

z

SPOE

When connecting the AP to a device that supports Serial and Power Over
Ethernet (SPOE), use an 8-conductor, Category 5 UTP, straight-through FE
cable.

The OmniAccess AP6000 (with Line Card OAW-LC-2G-24FP), the OmniAccess
4324, the OmniAccess 4304, and the OmniAccess 4308 support SPOE.

z

POE

If the connecting device supports only Power Over Ethernet (POE), use a 4- or
8-conductor, Category 5 UTP, straight-through FE cable.

z

Network Only

If the connecting device does not support POE, use a 4- or 8-conductor,
Category 5 UTP, FE cable. The port detects MDI/MDX and automatically adjusts
for straight-through or crossover cables.

The maximum length for FE cables is 100 meters (325 feet).

When the OmniAccess AP60/61 is installed in an air-handling space, such as
above suspended ceilings, as described in National Electrical Code (2002)
Article 300.22(C), and Canadian Electrical Code, Sections 2-128, 12-010(3) and
12-100, Part 1, CSA C22.1, POE is required. Also, any FE cable installed in
such spaces should be suitable under NEC Article 800.50 and marked
accordingly for use in plenums and air-handling spaces with regard to smoke
propagation, such as CL2-P, CL3-P, MPP, or CMP.

«
...
34
35
36
37
38
...
»

Содержание OmniAccess AP60





































































Отзывы:

Нет отзывов

Похожие инструкции для OmniAccess AP60

Бренд: Samsung Страницы: 1

UniFi AP AC Outdoor

Бренд: Ubiquiti Страницы: 26

Бренд: Teldat Страницы: 24

Бренд: GROM Audio Страницы: 4

Бренд: Belkin Страницы: 40

Nfiniti WHR-HP-GN

Бренд: Buffalo Страницы: 43

Бренд: TRENDnet Страницы: 93

cnPilot E410 Indoor

Бренд: Cambium Networks Страницы: 52

MAX-STREAM MR6350

Бренд: Linksys Страницы: 28

Бренд: Jaton Страницы: 8

Бренд: Comtrend Corporation Страницы: 92

Бренд: Comtrend Corporation Страницы: 88

Бренд: Broadxent Страницы: 27

Бренд: Nortel Страницы: 130

Бренд: Quectel Страницы: 53

Бренд: AAxeon Страницы: 50

Бренд: Franklin Страницы: 61

Бренд: Draytek Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды