Alcatel-Lucent OmniAccess 700, Руководство по настройке CLI

Страница: 959 / 1193

QoS Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
933
Alcatel-Lucent
Beta Beta
CLI Configuration Guide
T
O
C
ONFIGURE A
P
OLICY
M
AP
D
ESCRIPTION
E
XAMPLE
ALU(config-qos-P1)# description P1 is the name of the policy-
map
ALU(config-qos-P1)# show policy-map P1
policy-map P1
description P1 is the name of the Policy Map
T
O
C
ONFIGURE A
T
RAFFIC
C
LASS
E
XAMPLE
ALU(config-qos-P1)# class C1
ALU(config-qos-P1-C1)#
ALU(config-qos-P1-C1)# class class-default
ALU(config-qos-P1-class-default)#
ALU(config-qos-P1)# no class C1
Class C1 removed.
Command (in Policy-map Mode) Description
description < line >
The description for the policy map
configured.
Command (in Policy-map Mode) Description
class { <class-map name> |
<class-default> }
This command is used to configure a traffic
class, i.e., associate a user-defined class map
to the policy map.
Use class-default keyword to configure the
default traffic class to the policy map.
This command enters Class sub-configuration
mode inside the Policy-map mode.
Note: If no rule is associated with a
class-map and if you try to
configure a class on that class-
map, a warning is displayed.
Example:
ALU (config-qos-P1)#
class C1
No rule in class-map C1.
It will not match any
traffic.
no class <class-map name>
This command removes a traffic class
associated with the policy map.