manualshive.com logo in svg

Alcatel-Lucent OmniAccess 700, Руководство по настройке CLI

Поделиться
Скачать
Alcatel-Lucent OmniAccess 700 Скачать руководство пользователя страница 2

Copyright

The Specifications And Information regarding the products in this manual are subject to change without 
notice. All statements, information, and recommendations in this manual are believed to be accurate 
but are presented without warranty of any kind, express or implied. Users must take full responsibility 
for their application of any products.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET 
FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED 
HEREIN BY THIS REFERENCE.

This equipment has been tested and found to comply within the limits pursuant to the (Centre for 
Telecom) rules. These limits are designed to provide protection against harmful interference when the 
equipment is operated in a commercial environment.

The following information is for the Users of the OmniAccess 700: If it is not installed in accordance with 
the installation instructions, it may not function exactly to the said specifications. Modifying the 
equipment without Alcatel-Lucent’s written authorization may result in the equipment no longer 
complying with the said dimensions.

Copyright © 2008, Alcatel-Lucent. All rights reserved.  Alcatel-Lucent and Alcatel-Lucent logo are 
registered trademarks of Alcatel-Lucent. The contents or specifications contained within this document 
are subject to change without notice.

Not withstanding any other warranty herein, all hardware and software are provided "as is" with all 
faults. Alcatel-Lucent disclaim all warranties, expressed or implied, including, without limitation, those 
of merchantability, fitness for a particular purpose and non-infringement or arising from a course of 
dealing, usage, or trade practice. In no event shall Alcatel-Lucent be liable for any indirect, special, 
consequential, or incidental damages, including, without limitation, lost profits or loss or damage to data 
arising out of the use or inability to use this manual, even if Alcatel-Lucent have been advised of the 
possibility of such damages.

3
4

5

Содержание OmniAccess 700










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды