manualshive.com logo in svg

Alcatel-Lucent OmniAccess 700, Руководство по настройке CLI

Поделиться
Скачать
Alcatel-Lucent OmniAccess 700 Скачать руководство пользователя страница 1166

Software Licenses and Acknowledgements

Left running head: 
Chapter name (automatic)

48

Beta

Beta

CLI Configuration Guide

Alcatel-Lucent

O

PEN

SSH

OpenSSH is developed by the OpenBSD project. It contains components that are 
under a BSD license or a license more free than that. OpenSSH contains no GPL 
code.

The creator of SSH is Tau Ylonen [email protected]

Copyright (c) 1995 Tatu Ylonen <[email protected]>, Espoo, Finland. All rights 
reserved

As far as I am concerned, the code I have written for this software can be used 
freely for any purpose. Any derived versions of this software must be clearly 
marked as such, and if the derived work is incompatible with the protocol 
description in the RFC file, it must be called by a name other than "ssh" or 
"Secure Shell".

The 32-bit CRC compensation attack detector was contributed by CORE SDI S.A. 
under a BSD-style license.

Copyright (c) 1998 CORE SDI S.A., Buenos Aires, Argentina.

All rights reserved. Redistribution and use in source and binary forms, with or 
without modification, are permitted provided that this copyright notice is retained.

THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED 
WARRANTIES ARE DISCLAIMED. IN NO EVENT SHALL CORE SDI S.A.BE 
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY 
OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR MISUSE 
OF THIS SOFTWARE.

Ariel Futoransky <[email protected]>  <http://www.core-sdi.com>

ssh-keyscan was contributed by David Mazieres under a BSD style license.

Copyright 1995, 1996 by David Mazieres <[email protected]>.

Modification and redistribution in source and binary forms is permitted provided 
that due credit is given to the author and the OpenBSD project by leaving this 
copyright notice intact.

One component of ssh source code is pulled from the original Berkeley code.

Copyright (c) 1983, 1990, 1992, 1993, 1995

The Regents of the University of California. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, 
are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list 
of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this 
list of conditions and the following disclaimer in the documentation and/or other 
materials provided with the distribution.

3. Neither the name of the University nor the names of its contributors may be 
used to endorse or promote products derived from this software without specific 
prior written permission.

Содержание OmniAccess 700










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды