manualshive.com logo in svg

Alcatel-Lucent OmniAccess 700, Руководство по настройке CLI

Поделиться
Скачать
Alcatel-Lucent OmniAccess 700 Скачать руководство пользователя страница 1170

Software Licenses and Acknowledgements

Left running head: 
Chapter name (automatic)

52

Beta

Beta

CLI Configuration Guide

Alcatel-Lucent

S

TRONGSWAN

 IKE

Copyright (C) 1997 Angelos D. Keromytis.

Copyright (C) 1998-2001 D. Hugh Redelmeier.

This program is free software; you can redistribute it and/or modify it under the 
terms of the GNU General Public License as published by the Free Software 
Foundation; either version 2 of the License, or (at your option) any later version. 
See <http://www.fsf.org/copyleft/gpl.txt>. 

This program is distributed in the hope that it will be useful, but WITHOUT ANY 
WARRANTY; without even the implied warranty of MERCHANTABILITY or 
FITNESS FOR A PARTICULAR PURPOSE.

A copy of the GNU General Public License is provided at the end of this chapter, 
and also available from 

http://www.gnu.org/licenses/gpl.html

F

REE

BSD C

RYPTO

 L

IBRARY

Copyright (C) 1995-1998 Eric Young ([email protected]). All rights reserved.

This package is an SSL implementation written by Eric Young 
([email protected]).

The implementation was written so as to conform with Netscapes SSL. 

This library is free for commercial and non-commercial use as long as the 
following conditions are adhered to. The following conditions apply to all code 
found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the 
SSL code. The SSL documentation included with this distribution is covered by 
the same copyright terms except that the holder is Tim Hudson 
([email protected]).

Copyright remains Eric Young's, and as such any Copyright notices in the code 
are not to be removed. If this package is used in a product, Eric Young should be 
given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in 
documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, 
are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of 
conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this 
list of conditions and the following disclaimer in the documentation and/or other 
materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must 
display the following acknowledgement:

This product includes cryptographic software written by Eric Young 
[email protected])" The word 'cryptographic' can be left out if the routines from 
the library being used are not cryptographic related:-).

4. If you include any Windows specific code (or a derivative thereof) from the apps 
directory (application code) you must include an acknowledgement:

Содержание OmniAccess 700










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды