Alcatel-Lucent 7710 SR OS, Руководство по настройке интерфейса

Страница: 363 / 436

Interface Configuration
7710 SR OS Interface Configuration Guide Page 363
Sample Output
A:ALA-49>config>port# show port 3/2/1 otu detail
===============================================================================
OTU Interface
===============================================================================
OTU Status : Enabled FEC Mode : enhanced
Data Rate : 11.049 Gb/s
Cfg Alarms : loc los lof lom otu-ber-sf otu-bdi fec-sf
Alarm Status :
SF/SD Method : FEC SF Threshold : 1E-5
SD Threshold : 1E-7
SM-TTI Tx (<mode>)
This is the configured SM-TTI (Section Monitor Trail Trace Identifier)
to be transmitted by this port in the OTU overhead bytes. The modes
are auto, string, or bytes. In the auto and string modes, a printable char-
acter string will be displayed. In bytes mode, up to 64 hex bytes will be
displayed
SM-TTI Rx
This is the SM-TTI (Section Monitor Trail Trace Identifier received by
this port. When the received TTI is a printable string of characters, it
will be displayed as a text string. When the received TTI contains one
or more non-printable characters, it will be displayed at a sequence of
64 hex bytes. When the received TTI is all zeros, the string “Not Spec-
ified” will be displayed.
FEC Corrected 0s
Displays the number of bits that were received as 0s but corrected to
1s.
FEC Corrected 1s
Number of bits that were received as 1s but corrected to 0s.
FEC Uncorrectable
Sub-Rows
The number of sub-rows that were not corrected because too many
errors were detected.
FEC SES
The number of severely errored seconds were the number of uncorrect-
able sub-rows was greater than 15% of the maximum.
SM BIP8
The number of detected BIP-8 errors in the section monitor overhead.
SM BEI
The number of backward error indications received from the far end in
the section monitor overhead.
SM SES
Section monitor severely errored seconds where the number of SM-
BIP8 was greater than 15% of the maximum.
PM BIP8
The number of detected BIP-8 errors in the section monitor overhead.
PM BEI
The number of backward error indications received from the far end in
the section monitor overhead.
PM SES
Section monitor severely errored seconds where the number of SM-
BIP8 was greater than 15% of the maximum.
Label Description (Continued)