Alcatel-Lucent 7710 SR OS, Руководство по настройке интерфейса

Страница: 211 / 436

Interface Configuration
7710 SR OS Interface Configuration Guide Page 211
scheduler-policy
Syntax scheduler-policy scheduler-policy-name
no scheduler-policy
Context config>port>ethernet>access>egr>qgrp
config>port>ethernet>access>ing>qgrp
config>port>ethernet>network>egr>qgrp
Description
This command associates a virtual scheduler policy with a port queue group. Scheduler policies are
defined in the
config>qos>scheduler-policy scheduler-policy-name context.
The no form of this command removes the configured ingress or egress scheduler policy from the
queue-group.
Parameters scheduler-policy-name — The scheduler-policy-name parameter applies an existing scheduler policy
that was created in the config>qos>scheduler-policy scheduler-policy-name context to create
the hierarchy of ingress or egress virtual schedulers.
secondary-shaper
Syntax secondary-shaper secondary-shaper-name rate { max | rate }
no secondary-shaper secondary-shaper-name
Context config>port>ethernet>access>egress
Description This command configures the Ethernet access egress secondary shaper on this port.
Parameters secondary-shaper-name — Specifies the secondary shaper name to apply to this port.
rate { max | rate } — The max keyword and rate parameter are mutually exclusive.
max — The max keyword specifies that the egress aggregate rate limit is unlimited.
rate — The rate parameter defines the actual egress rate.
Values 1 — 10000 Mbps
autonegotiate
Syntax autonegotiate [ limited ]
[ no ] autonegotiate
Context config>port>ethernet
Description This command enables speed and duplex autonegotiation on Fast Ethernet ports and enables far-end
fault indicator support on gigabit ports.
There are three possible settings for autonegotiation:
• “on” or enabled with full port capabilities advertised
• “off” or disabled where there are no autonegotiation advertisements