Alcatel-Lucent 7710 SR OS, Руководство по настройке интерфейса

Страница: 301 / 436

Interface Configuration
7710 SR OS Interface Configuration Guide Page 301
Multi-Chassis Redundancy Commands
redundancy
Syntax redundancy
Context config
Description This command allows the user to perform redundancy operations.
Associated commands include the following in the admin>redundancy context:
force-switchover — Forces a switchover to the standby CFM card.
now — Switch to standby CFM.
NOTE: Switching to the standby displays the following message.
WARNING: Configuration and/or Boot options may have changed since the last save.
Are you sure you want to switchover (y/n)?
synchronize — Synchronizes the secondary CFM.
Values <boot-env|config> : keywords
Refer to the 7710 SR OS Basic System Configuration Guide.
synchronize
Syntax synchronize { boot-env | config }
Context config>redundancy
Description This command performs a synchronization of the standby CFM’s images and/or config files to the
active CFMCFM. Either the
boot-env or config parameter must be specified.
In the config>redundancy context, this command performs an automatically triggered standby CFM
synchronization.
When the standby CFM takes over operation following a failure or reset of the active CFM, it is
important to ensure that the active and standby CFMs have identical operational parameters. This
includes the saved configuration, CPM and IOM images.This includes the saved configuration, CPM
and IOM images.This includes the saved configuration and CFM images.
The active CFM ensures that the active configuration is maintained on the standby CFM. However, to
ensure smooth operation under all circumstances, runtime images and system initialization
configurations must also be automatically synchronized between the active and standby CFM.
If synchronization fails, alarms and log messages that indicate the type of error that caused the failure
of the synchronization operation are generated. When the error condition ceases to exist, the alarm is
cleared.