Alcatel-Lucent 7710 SR OS, Руководство по настройке интерфейса

Страница: 302 / 436

Configuration Commands
Page 302 7710 SR OS Interface Configuration Guide
Only files stored on the router are synchronized. If a configuration file or image is stored in a location
other than on a local compact flash, the file is not synchronized (for example, storing a configuration
file on an FTP server).
Default enabled
Parameters boot-env — Synchronizes all files required for the boot process (loader, BOF, images, and
configuration files.
config — Synchronize only the primary, secondary, and tertiary configuration files.
Default config
multi-chassis
Syntax multi-chassis
Context config>redundancy
Description This command enables the context to configure multi-chassis parameters.
peer
Syntax [ no ] peer ip-address create
Context config>redundancy>multi-chassis
Description Use this command to configure up to four multi-chassis redundancy peers.
Parameters ip-address — Specifies the IP address.
Values ipv4-address: a.b.c.d
ipv6-address: x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
create — Mandatory keyword specifies to create the peer.
authentication-key
Syntax authentication-key [ authentication-key | hash-key ] [ hash | hash2 ]
no authentication-key
Context config>redundancy>multi-chassis>peer
Description This command configures the authentication key used between this node and the multi-chassis peer.
The authentication key can be any combination of letters or numbers.