Alcatel-Lucent 7710 SR OS, Руководство по настройке интерфейса

Страница: 205 / 436

Interface Configuration
7710 SR OS Interface Configuration Guide Page 205
egress template support the port-parent command. Each command is used for configuring egress port
virtual scheduling behavior.
Each queue group allows the application of an accounting policy and the ability to enable and disable
collecting statistics. The statistics are derived from the queue counters on each queue within the
queue group. The accounting policy defines which queue counters are collected and to which
accounting file they will be written.
A queue group does not have an administrative shutdown or no shutdown command. A queue group
is considered to be always ?p?once created.
When creating a queue group, the system will attempt to allocate queue resources based on the queues
defined in the queue group template. If the appropriate queue resources do not currently exist, the
queue group will not be created. Ingress port queue groups do not support the shared-queuing or
multipoint-shared queuing behavior.
When the queue group is created on a LAG (Link Aggregation Group), it must be created on the
primary port member. The primary port member is the port with the lowest port ID based on the slot,
MDA position and port number on the MDA. A queue group created on the primary LAG port will be
automatically created on all other port members. If a new port is being added to a LAG with an
existing queue group, the queue group must first be created on the port prior to adding the port to the
LAG. If the LAG queue group has queue overrides, the queue overrides must also be defined on the
port queue group prior to adding the port to the LAG.
A port queue group cannot be removed from the port when a forwarding class is currently redirected
to the group. All forwarding class redirections must first be removed prior to removing the queue
group.
Default
none
Parameters
group-name — The group-name parameter is required when executing the port queue-group
command. The specified group-name must exist as an ingress or egress queue group template
depending on the ingress or egress context of the port queue group. Only a single queue group
may be created on an ingress port. Multiple queue groups may be created on an egress port.
create — Keyword used to associate the queue group. The create keyword requirement can be
enabled/disabled in the environment>create context.
agg-rate-limit
Syntax agg-rate-limit kilobits-per-second [ queue-frame-based-accounting ]
no agg-rate-limit
Context config>port>ethernet>access>egr>qgrp
config>port>ethernet>access>ing>qgrp
config>port>ethernet>network>egr>qgrp
Description
This command defines a maximum total rate for queues. The agg-rate-limit command is mutually
exclusive with the scheduler policy. When an egress scheduler policy is defined, the agg-rate-limit