ALAT UJI PTT 2000 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 25

background image

Page 18

There are various control buttons to perform operations with this program, these include:

Save -

Saves the Tool Test Setups on the PC so it can be used to run further tests in the future.

Open -

Opens previously saved Tool Test Setups.

Send -

Send a Tool Test to the PTT. It can store up to 100 tests with 25 readings or 25 tests with100 readings or any

similar combination that does not exceed 2500 results

Delete Test in Meter -

Deletes this specific test from the PTT. The operator will be asked for confirmation before the

action takes place.

Download Results -

Retrieves the results of a tool test after it has been run. It will offer a change to add further notes to

the test at this point. The results will be saved in the PC in C:\PTT 2000\Tool Test Results\Operator Folder where the
"Operator Folder" will be the name of the Operator entered in the upper portion of the Tool Test Screen. The results are
stored in a .csv file which can be opened in Excel or using a text editor program, such a Notepad. The file name will be
the name given to the tool followed by the date and the time at which to test was started.

Clear Data in Meter -

Clears the test data for this Tool Test in the PTT meter. Make sure to Download the Results

before clicking this button. The operator will be asked for confirmation before the action takes place.

«
...
17
18
19
20
21
...
»

Содержание PTT 2000


























Отзывы:

Нет отзывов

Похожие инструкции для PTT 2000

Бренд: Abicor Binzel Страницы: 92

LSP400 LED Series

Бренд: WE-EF Страницы: 6

Бренд: Waterpik Страницы: 2

Бренд: WaterUps Страницы: 2

Бренд: B medical systems Страницы: 28

Бренд: Landoll Страницы: 144

Бренд: Castellini Страницы: 299

Бренд: Lowenstein Medical Страницы: 457

GrainLogix XLB10

Бренд: LOFTNESS Страницы: 104

Бренд: MakAlon Страницы: 36

Бренд: SureShot Страницы: 24

TEMSTM POCKET 7.3

Бренд: ASCOM Страницы: 8

Бренд: Chamberlain Страницы: 8

Бренд: LINET Страницы: 25

Бренд: MD SPORTS Страницы: 12

Бренд: SurgiVet Страницы: 2

ANY SPOT AS-1400-2P

Бренд: Galaxy Audio Страницы: 12

Бренд: Knightsbridge Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды