Angle Threshold
Angle Threshold: 2 deg
Main
1. Use the
Scroll Up or Down
key to toggle through the degree values (0.25-5)
It move at increments of 0.25
2. Press
Enter
key once setting is complete.
3. Press
Main
button to return to main display screen.
Page 10
Tolerance
Auto Clear
Angle Threshold
T+A Threshold
First Peak
Direction
This allows an operator to set up an initial torque and follow up with a rotation to a specified angle and display the
final torque.
Angle
Angle Thresh
Angle:
2.00
deg
Torque:
50.000
lbf.in
Allow Ratchet: No
Main
1. Press the
"Menu"
Button.
2. Use the
Scroll Down
key and select Setup by highlighting and pressing
Enter
.
3. Use the
Scroll Up or Down
key to toggle through the Setup options.
4. Press
Enter
key to select a setup setting for
Angle
.
Filter
Units
Mode
Setup
Selecting Angle
1. Press the
Right
or
Left
key to toggle between the three settings: Angle, Torque
Allow Ratchet
2. Use the
Scroll Up or Down
key to set Angle (increments of 0.25)
3. Use the
Scroll Up or Down
key to set Torque (increments of 0.5)
4. Use the
Scroll Up or Down
key to set “Yes” or “No” for allowing ratchet*.
5. Press
Enter
key once setting is complete.
6. Press
Main
button to return to main display screen.
* Note - “Yes” allows for ratcheting the wrench back without accumulating
angle.
