A Top Safety and Protection Solution Worldwide!
Page
８
of 32 Ver 1.0
15) Supports internal speaker to the user to use as a two-way voice
communication;
16) It is Compatible with PT2262 and PT2242 wireless IC;
17) Standby internal rechargeable battery which can last 18 hours;
18) Based on the GSM communication network and Operation Menu
Display technology, the system can be applied to wide range situations.
6. Settings
Tips!
1)
Please insert the SIM Card first then install the GSM antenna and then power
it on. You can also insert the SIM card after you have set up the antenna.
2)
All the wireless sensors in the standard package have been assigned to the
mainframe already.
3)
After you power on the mainframe, the mainframe will auto detect and
display the process. It will detect the 8 wired input current connection status
and display this on the LCD with 8 characters.
O
stands for Open,
C
stands
for Close,
L
stands for with 2.2K EOL,
E
Stands for not includes the previous
3 states. The device will register the GSM Network and display the GSM
Signal ICON in the left corner of the LCD.
4)
All of the setup can be done by the LCD except to modify the Zone name, if
you need to modify the zone name, please see the command list in the
related chapter.
5)
Only to disarm by keyboard and to modify settings requires a password, the
other operations
don’t need passwords. The default password is 1234. Enter
password then press the Enter button to enter the system.
6)
In standby mode, press #3#6, following UP button. The system will recover
to factory default settings, the password will be 1234. The registered
wireless sensors and the Wired type will remain.
7)
Two way communication:
In standby mode, dial the telephone number, following the
, the system
will dial out; With an incoming call, press the
button to answer the call.
