A Top Safety and Protection Solution Worldwide!
Page
２２
of 32 Ver 1.0
status. It is not the alarm link Output Relay Status.
8. Installation
Before installing the control unit, sensors and sirens, please help to test the
system firstly, including wireless sensor, power supply, GSM signal, etc.
Please ensure the wireless sensors and electrical appliances are more than
3~5m from the mainframe.
8.1
Insert SIM into Control Unit and install the GSM ANT.
In the backside of the control unit, please install the GSM SIM card.
.
The GSM ANT must be installed vertical to ensure good working condition.
8.2
Install the Wireless Magnetic door/window sensors
Magnetic door/window sensors signal the Control Unit when the two parts
separate by more than
1.5 to 3.0cm
.
In some circumstances an Infrared beam fence is more appropriate than
magnetic sensors. i.e. veranda, picture window balcony, boundary wall e.t.c.
