A Top Safety and Protection Solution Worldwide!
Page
１９
of 32 Ver 1.0
table. If the setup is successful, the system will return OK to confirm the
operation.
E.g.: Modify the first wireless zone name as
Front Door Opened by Intruder!
You should
edit a SMS Content:
1234#M01# Front Door Opened by Intruder!#
,the 1234 is the
password. Then send it to the SIM card Number.
For Wired Zone Name, the format is:
P#+Z+Zone Serial
#+New Zone Name+#
. Characters for the zone name are 32. The
Zone Serial Number is 01~08 corresponding to the LCD Menu and 6.2.2.2
table. If setup successful, the system will return OK to confirm the operation.
E.g.: Modify the first wired zone name as
Front Door Opened by Intruder!
You should
edit a SMS Content:
1234#Z01# Front Door Opened by Intruder!#
,the 1234 is the
password. Then send it to the SIM card Number.
7. Operating Instructions
Tips!
The user can arm/disarm/Stay (Partial armed) by Remote controls, Keyboard or
SMS. The user can cancel the alarm by Remote Controls, Keyboard or SMS to
disarm. The user can switch the independent output relay on or off by SMS
Commands.
7.1 Arm or Disarm or Stay (Partial Arm, At House Arm) and Emergency
Alarm by remote controls
Press the button “ ” on the remote control or Press Arm button on the
keyboard then select Arm, the Control Unit enters arm status (delay time
according to the setting), the
ICON will then be on. Under this status,
with any sensor triggered, the control unit will alarm. If the call is answered,
