background image

36 

ALARM LOCK SYSTEMS, INC. (ALARM LOCK) war-
rants its products to be free from manufacturing defects 
in materials and workmanship for 36 months following 
the date of manufacture. ALARM LOCK will, within said 
period, at its option, repair or replace any product failing 
to operate correctly without charge to the original pur-
chaser or user. 

This warranty shall not apply to any equipment, or any 
part thereof, which has been repaired by others, im-
properly installed, improperly used, abused, altered, 
damaged, subjected to acts of God, or on which any 
serial numbers have been altered, defaced or removed. 
Seller will not be responsible for any dismantling or rein-
stallation charges. 

THERE ARE NO WARRANTIES, EXPRESS OR IM-
PLIED, WHICH EXTEND BEYOND THE DESCRIP-
TION ON THE FACE HEREOF. THERE IS NO EX-
PRESS OR IMPLIED WARRANTY OF MERCHANT-
ABILITY OR A WARRANTY OF FITNESS FOR A PAR-
TICULAR PURPOSE. ADDITIONALLY, THIS WAR-
RANTY IS IN LIEU OF ALL OTHER OBLIGATIONS 
OR LIABILITIES ON THE PART OF ALARM LOCK. 

Any action for breach of warranty, including but not lim-
ited to any implied warranty of merchantability, must be 
brought within the six months following the end of the 
warranty period. IN NO CASE SHALL ALARM LOCK 
BE LIABLE TO ANYONE FOR ANY CONSEQUEN-
TIAL OR INCIDENTAL DAMAGES FOR BREACH OF 
THIS OR ANY OTHER WARRANTY, EXPRESS OR 
IMPLIED, EVEN IF THE LOSS OR DAMAGE IS 
CAUSED BY THE SELLER'S OWN NEGLIGENCE OR 
FAULT. 

In case of defect, contact the security professional who 
installed and maintains your security system. In order to 
exercise the warranty, the product must be returned by 
the security professional, shipping costs prepaid and 
insured to ALARM LOCK. After repair or replacement, 
ALARM LOCK assumes the cost of returning products 
under warranty. ALARM LOCK shall have no obligation 
under this warranty, or otherwise, if the product has 
been repaired by others, improperly installed, improp-
erly used, abused, altered, damaged, subjected to acci-
dent, nuisance, flood, fire or acts of God, or on which 
any serial numbers have been altered, defaced or re-
moved. ALARM LOCK will not be responsible for any 
dismantling, reassembly or reinstallation charges. 

This warranty contains the entire warranty. It is the sole 
warranty and any prior agreements or representations, 
whether oral or written, are either merged herein or are 
expressly cancelled. ALARM LOCK neither assumes, 
nor authorizes any other person purporting to act on its 
behalf to modify, to change, or to assume for it, any 

other warranty or liability concerning its products. 

In no event shall ALARM LOCK be liable for an amount 
in excess of ALARM LOCK's original selling price of the 
product, for any loss or damage, whether direct, indi-
rect, incidental, consequential, or otherwise arising out 
of any failure of the product. Seller's warranty, as here-
inabove set forth, shall not be enlarged, diminished or 
affected by and no obligation or liability shall arise or 
grow out of Seller's rendering of technical advice or ser-
vice in connection with Buyer's order of the goods fur-
nished hereunder. 

ALARM LOCK RECOMMENDS THAT THE ENTIRE 
SYSTEM BE COMPLETELY TESTED WEEKLY. 

Warning: Despite frequent testing, and due to, but not 
limited to, any or all of the following; criminal tampering, 
electrical or communications disruption, it is possible for 
the system to fail to perform as expected. ALARM 
LOCK does not represent that the product/system may 
not be compromised or circumvented; or that the prod-
uct or system will prevent any personal injury or prop-
erty loss by burglary, robbery, fire or otherwise; nor that 
the product or system will in all cases provide adequate 
warning or protection. A properly installed and main-
tained alarm may only reduce risk of burglary, robbery, 
fire or otherwise but it is not insurance or a guarantee 
that these events will not occur. CONSEQUENTLY, 
SELLER SHALL HAVE NO LIABILITY FOR ANY PER-
SONAL INJURY, PROPERTY DAMAGE, OR OTHER 
LOSS BASED ON A CLAIM THE PRODUCT FAILED 
TO GIVE WARNING. Therefore, the installer should in 
turn advise the consumer to take any and all precau-
tions for his or her safety including, but not limited to, 
fleeing the premises and allig police or fire department, 
in order to mitigate the possibilities of harm and/or dam-
age. 

ALARM LOCK is not an insurer of either the property or 
safety of the user's family or employees, and limits its 
liability for any loss or damage including incidental or 
consequential damages to ALARM LOCK's original sell-
ing price of the product regardless of the cause of such 
loss or damage. 

Some states do not allow limitations on how long an im-
plied warranty lasts or do not allow the exclusion or limi-
tation of incidental or consequential damages, or differ-
entiate in their treatment of limitations of liability for ordi-
nary or gross negligence, so the above limitations or 
exclusions may not apply to you. This Warranty gives 
you specific legal rights and you may also have other 
rights which vary from state to state.

 

ALARM LOCK LIMITED WARRANTY

 

Содержание Trilogy DL2800





































Отзывы: