Alarm Lock Trilogy DL2800, Инструкция по программированию

Страница: 14 / 36

14
Enabling/Disabling Users (By User Number)
USERS
Programming Functions
1. New Master Code
(User Number 1)
; 1 ; [ _ _ _ _ _ _ ] ; [ _ _ _ _ _ _ ] :
(New Master Code) (Confirm New Master Code)
•
Master Code must be 6 digits-only.
•
Factory Default =
123456
•
NOTE: Following a power up, it is highly recommended that Function 1 (New Master
Code), be accessed and the factory default Master Code changed before programming
any other functions.
•
See "Lock Design Overview" on page 5 and "Quick Start" on page 6 for more informa-
tion about the Master Code.
M
2. Add/Delete/Change User Codes 2-200
; 2 ; [ _ _ _ _ ]
*
; [ _ _ _ _ _ _ ] :
(User Number) (User Code)
User Number must be between 2 and 200.
•
To delete a code, leave the User Code blank
•
User Code must be 3-6 digits
•
Each User Code can be thought of as a "User" or a person. As long as each person possesses
their own unique User Code, you can control access to the lock by adding or deleting User
Codes. See "Terminology Used in this Manual" on page 7 for more information.
User Code Conflicts
Care should be taken not to program a new User Code which matches the first digits of any other
User Code--by default, only the code with the least number of digits would be recognized.
For example: If User Codes 123 and 123456 are both entered in the lock, only code 123 would
be recognized.
If you wish to program User Codes that match the first digits of other codes, see program Func-
tion 69.
NOTE: An error will sound if you try to program a new User Code that matches the first digits of
the Master User Code (User Number 1).
3
3. Disable User
; 3 ;
[ _ _ _ _ ]
:
(User Number)
4. Enable User
; 4 ;
[ _ _ _ _ ]
:
(User Number)
•
User Number must be between 2 and 200.
NOTE: Will Enable/Disable Users even if the User is associated with an enabled Group. Use Feature 3 to disable a specific User
Number and their associated User Code. If the disabled User Code is entered, the lock will flash 1 Green and 4 Red Flashes
(with 1 long and 5 short beeps) indicating that the User Code exists in memory, but is disabled. Function 4 will "undo" Function 3.
2