15
USERS (Continued)
8. Change User Programming Level Ability
;
8
;
[ _ _ _ ]
;
[ _ _ _ _ ]
:
(User Number) (Programming Levels)
Service Code is a "One-Time-Only" code. Once it is used, it is disabled until enabled again.
; 9 :
9. Enable User 300
(Service Code)
User Number must be between 2 and 200. The ability to program one or more
Programming
Levels
may be selected.
Example 1
: Allow "Basic" User 67 to program levels 1, 2 and 4. Enter:
;
8
;
6
7
;
1
2
4
:
NOTE:
User 67 does not have access to Programming Functions with a Program Level
Ability of 3.
E
xample 2:
Prevent User 67 from programming any programming levels. Enter:
;
8
;
6
7
:
NOTE:
Having a Program Level Ability of 4 does not allow access to functions requiring
a Program Level Ability of 3, 2 or 1. If multiple levels are required, program for each
level that is required.
3
2
2
11. Reserved
Programming Functions (cont'd)
5. User Enable with Timeout
(Enter Timeout, XXX Hours)
(This Function enabled through keypad only)
;
5
;
[ _ _ _ _ ]
;
[ _ _ _ _ ]
:
(User Number) (XXX Hours)
•
With Function 5, User Numbers must be between 2-200, 299 or 300. Hours must be between 1-999.
•
Function 5 can
temporarily
override a disabled User (disabled using Function 3 above).
•
Since this is a temporary feature, Function 5 can
only
be enabled using the keypad.
•
Example:
Brian, User Number 157, rarely works at the office, but when he does, enable him for his 8 hour work day
("008") by entering Program Mode and pressing:
;
5
;
157
;
008
:
.
•
NOTE:
Up to 4 Timeout Functions may be pending at any one time. An error beep will sound when attempting to
program more than 4 Timeout Functions.
2
; 6 :
6. Enable Total User Lockout Mode
(This Function enabled through keypad only)
7. Disable Total User Lockout Mode
(This Function enabled through keypad only)
; 7 :
User Lockout Mode
Prevents all User Codes (Except User 1 Master Code) from operating the lock.
Note:
Other program-
ming functions or schedules will NOT re-enable Users. Users must be re-enabled with Function 7.
Note:
Does not change the User enable/disable status.
Note:
If the lock is currently in Passage Mode
("door unlocked") and Function 6 is programmed, the lock will remain in Passage Mode.
M
;
1
0
;
0
0
0
:
10. Erase All Users Except the Master Code
(User 1)
(This Function enabled through keypad only)
Erases all User Codes except the Master Code (User 1).
M
Содержание Trilogy DL2800
Страница 34: ...34 NOTES ...
Страница 35: ...35 NOTES ...
