FAX:
1-800-646-8988
O N
V
email: [email protected]
http: // www.vonmorris.com
O R R IS
M
PHONE: 1-800-646-6888
9202 Edge Pull
# 8 x 1" sheet
metal screw (x2)
SCALE:1:24
PROPRIETARY AND CONFIDENTIAL
SIZE
DWG. NO.
A
REV.
MATERIAL
FINISH
DO NOT SCALE DRAWING
PROHIBITED.
SHEET 1 OF 2
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
DATE
NAME
IS
VON MORRIS CORPORATION
DRAWING IS THE SOLE PROPERTY OF
WITHOUT THE WRITTEN PERMISSION OF
THE INFORMATION CONTAINED IN THIS
REPRODUCTION IN PART OR AS A WHOLE
VON MORRIS CORPORATION
. ANY
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
TITLE:
82110 Blank plate
# 6 x 3/4" wood
screw (x4)
Finished face plate
# 4 x 3/8" machine
screw (x2)
NOTE: It is recommended that the Edge pull body cut out be centered between the blank plate cut outs.
9202 Edge Pull Installation Guide
3) Install finished face plate using the two (2) # 4 x 3/8" machine screws provided as shown below.
2) Install the 9202 edge pull using the two (2) # 8 x 1" sheet metal screws provided as shown below.
1) Prep door according to door prep template on last page.
4) Install 82110 blank plates to both sides of the door using the four (4) # 6 x 3/4" oval head wood screws
provided as shown below.
