14
ACCESS
= Entry into a restricted area.
AUDIT TRAIL
= A date/time stamped log of previous lock
events.
BURGLARY CONTROL PANEL
= Provides local alarm and
remote communication to request security for burglary/
break-in.
CLOCK
•
REAL TIME
CLOCK
= An accurate built-in clock that
allows date/time stamping of events. The clock can be
slowed or speeded up to fine tune long term accuracy
to within three minutes per year. Programmed only
through DL-Windows.
•
CLOCK SETTINGS
= Printout includes date, time,
weekday, and clock speed.
DATE
= Month, Day and Year entered as MMDDYY. Pro-
grammed only through DL-Windows.
DAY OF WEEK
= Sunday through Saturday (where 1 = Sun-
day and 7 = Saturday). Programmed only through DL-
Windows.
DEFAULT
= The original settings that were set at the factory;
in other words, it is the lock's original factory condition
when the lock was first taken out of its box. The default
settings are permanently encoded within the lock's fixed
memory, and when the lock is first started, or when power
is removed and re-applied (see pages 8-9), the original
factory default settings are re-loaded and take effect.
DOOR AJAR
= The controlled door was unlocked and was
held open for a certain duration. If the duration is longer
than the allowed
Door Ajar Trip Time In Seconds
(see
Features
screen,
Options
tab), first a log entry is re-
corded, then, if programmed, the Aux Relay engages for
2 seconds and/or the alert Sounder (enable "
Use
Sounder on Door Ajar
") is triggered.
Note:
The pro-
grammed
Door Ajar Trip Time In Seconds
begins after
the programmed Pass Time ends (see "
Pass Time
").
DISABLE
= Turn off.
DOWNLOAD
= Send data to lock.
ENABLE
= Turn on.
EVENTS
= Recorded lock activity.
FORCED ENTRY
= The Door Contacts detect the door was
opened without a prior valid credential to unlock the
PL6600 / ETPLNRX, or the door was opened without the
inside lever first being turned (to activate the Lever Monitor
Switch).
GROUP
•
USER GROUP
= Defining a User to specific Groups, al-
lows User entry when the Group is allowed entry. Pro-
grammed only through DL-Windows.
•
GROUP 1 DISARMS BURGLAR CONTROL
= A prox-
imity card (previously assigned to Group 1) presented to
the lock can disarm an alarm control panel during a pre-
defined scheduled time (if the proximity card is used out-
side of the scheduled time, the alarm control panel will not
disarm). The alarm control panel must be armed through
other means, must be programmed to disarm from an
armed state only, and the zone input must be pro-
grammed for input disarming. Programmed only through
DL-Windows.
•
GROUP 1 ENABLES GROUP 4 USERS
= A proximity
card (previously assigned to Group 1) presented to the
lock during a predefined schedule allows access to Group
4 Users. Programmed only through DL-Windows.
•
GROUP 1 PUTS UNIT IN PASSAGE
= A proximity card
(previously assigned to Group 1) presented to the lock
during a pre-defined schedule unlocks the lock. Pro-
grammed only through DL-Windows.
•
ONE TIME ONLY FOR GROUP 3 USERS
= If selected in
DL-Windows, allows Group 3 proximity cards to unlock
the door one time only (thereafter their proximity card be-
comes disabled). See OI237.
GUARD TOUR =
Associated with User 298 and User 299. A
Guard Tour card is used to log the movement of a secu-
rity guard as he or she makes rounds from one assigned
guard tour station to the next. Presenting the User 299
proximity card provides precise verification and account-
ability of a guard's movement by logging the location with
a time and date stamp in the Event Log ("Audit Trail").
Note:
Proximity cards assigned to User 298 and User
299 are
not
access cards (meaning these proximity cards
do NOT allow the security guard to pass through the
door).
INTERNAL RELAY FUNCTIONS
= The PL6600/ETPLNRX
internal relay can be programmed (via DL-Windows only)
for one or more functions. See page 10 for more informa-
tion.
LOG
= See... AUDIT TRAIL.
PASS TIME
= The duration in seconds that the PL6600 /
ETPLNRX will remain unlocked after a valid proximity card
has been presented.
PASSAGE
= Allow anyone to pass through the door without
proximity cards or fob ("door is unlocked").
RELAY
= Switched output allowing remote control of other
devices.
REMOTE INPUT
= Allows entry into a restricted area by
pressing a button connected to the two REMOTE INPUT
wires (two internal white wires) by someone on the pro-
tected side of the door.
SCHEDULE
= A programmed operation (enable/disable,
lock/unlock, etc.) on a specific day (Sunday through Sat-
urday) and time. Programmed only through DL-Windows.
SCHEDULES, QUICK
= Any one of four most common
types of schedules can be programmed. Programmed
only through DL-Windows.
TIME
= Hours and Minutes in the HHMM format. Pro-
grammed only through DL-Windows.
TIME / DATE STAMP
= A recorded date and time that an
event occurred.
TIMEOUT
= Allowing or restricting operation for a specified
number of hours.
UPLOAD
= Receive data from the lock.
USER
= A person who has been provided with a proximity
USER CARD for access through the door.
USER LOCKOUT, TOTAL
= All Users to be locked out
(denied access). Proximity User Cards will not unlock the
PL6600 / ETPLNRX.
Glossary
Содержание Networx ETPLNRX
Страница 15: ...15 NOTES ...
