Quantum™ MT™ Installation Instructions
Pg. 1 of 8
Quantum
™
MT
™
Installation Instructions
All parts needed to install the Quantum™ MT™ lock are included with each unit. Please check to make
sure all parts are accounted for before beginning installation. Do not substitute any of the parts. The use
of substitute parts will result in poor performance of the lock.
nce of the lock.
Mortise, MT, STD, DAJ
(A60000-HAND-G)
OR
Mortise, MT, ADB, DAJ
(A59990-HAND-G)
OR
Mortise, Std.
(A59810-HAND-G)
OR
Mortise, ADB
(A59850-HAND-G)
Outside Lever Trim
(A20970-HAND-COLOR)
Scalp Plate
(51190-COLOR)
Strike Plate
(30320-HAND-COLOR)
Inside Trim Assembly
(QCLXXXX-6-XX)
Card Reader Assembly
(A20950-COLOR)
Rubber Gaskets
(external applications only)
Screw Pack
(A29070-COLOR)
All information contained herein, including but not limited to product pricing and other intellectual property, is confidential and
intended for the sole use of the addressee(s) so named. Any misuse of this confidential information contained herein may result in
legal action by Computerized Security Systems dba SAFLOK and its parent company.
All information contained herein, including but not limited to product pricing and other intellectual property, is confidential and
intended for the sole use of the addressee(s) so named. Any misuse of this confidential information contained herein may result in
legal action by Computerized Security Systems dba SAFLOK and its parent company.
© SAFLOK™
INS_QTMCARDMT
2/16/2012
