Alarko SERADENS SRD 20, Инструкция по установке, эксплуатации и обслуживанию

Страница: 26 / 68

26
● Do not leave the appliance exposed to atmospheric elements (rain, sun, etc,) unless these conditions have
been expressly provided for.
● Do not allow the appliance to be used by children or anyone unfamiliar with its operation;
Electric power supply
 Connect the power supply to the terminal board inside the control panel as follows:
a. Switch off the power supply at the main switch.
b . Remove the front case panel of the boiler.
c. Slacken the screws and remove plate A (see fi g. 7).
d. With the plate removed, connect the wires to the terminal board B as follows:
● Connect the earth wire (normally coloured green/yellow) to the terminal marked with the earth symbol “ “.
● Connect the neutral wire (normally coloured blue) to the terminal marked with the letter “N”.
● Connect the live wire (normally coloured brown) to the terminal marked with the letter “L”.
● Terminals identified by the letters: Ta => Room thermostat
Se => Outside temperature sensor
When the wires have been connected, place plate “A” back to position.
Fig. 1
Ta
LN
Ta
Se
Se
B
A
natural (blue)
(yellow/green)
live (brown)
7