Alarko OPTIMA, Инструкция по установке и эксплуатации

Страница: 10 / 48

10
3.5 Insulation Shells
The insulation shell is designed to mitigate the thermal losses in heating systems
and delivered with the pump. It is made of polypropylene foam and thoroughly
mounted on the pump by its perfectly fitting design.
Remove the insulation shells from the housing before the pump installation. See
Figure 3.2.
4. CONTENTS OF THE PACKAGE, LIFTING, TRANSPORTATI-
ON AND STORAGE
4.1 Contents of the Package
The package contains the following:
• Pump
• Insulation shells
• Manual
• Certificate of Warranty
• 2 pieces of gasket
• 1 pieces of O-ring
Figure 3.2: Insulation shells
CAUTION! Do not throw away the insulation shells.
4.2 Lifting
Ambient Temperature during the Transportation and Storage: -25°C to +40°C.
The pump should be protected from moisture, impacts and frost during the
transport and storage.