Akrapovic P-HF841, Инструкция по эксплуатации

Страница: 154 / 167

consequently unexpected changes both sound modes in uncontrolled
circumstances may take drivers by surprise, endangering the safety
of the passengers in the vehicle and/or other road users or causing
interference-related malfunctions. Refer to the Interference section
below.
Interference
All wireless devices are susceptible to or may cause interference. Do
not use the Sound Remote Controller in environments where such
interference might cause malfunction of machines or devices and/
or endanger the lives of others (e.g., in airplanes, in hospitals, or
near medical equipment or implanted medical devices) as well as in
places where the use of wireless devices is prohibited or restricted.
Child Safety
The Sound Remote Controller should be kept out of reach of children
because it contains small parts. The Sound Remote Controller and/
or Akrapovič Car Sound Kit App should not be operated by children.
Refer to the Road Safety section above.
For the Sound Remote Controller to work, it must be paired with the
sound receiver. The (original) Akrapovič exhaust system with the valves
and sound receiver must first be installed. Refer to the Akrapovič
exhaust system and the Akrapovič Sound Kit Installation Manual.
To pair the Sound Remote Controller with the sound receiver, press
and hold the button on the Sound Remote Controller until the red
LED starts flashing. Switch the car ON to supply the sound receiver.
The pairing process will occur automatically within ten seconds. If
the pairing process is completed successfully, the LED (white or red)
on the Sound Remote Controller will turn on for fifteen seconds.
PAIRING PROCESS
with a New Sound Remote Controller
OPERATING THE AKRAPOVIČ SOUND KIT
WITH THE SOUND REMOTE CONTROLLER
11 / 36 10 / 36