Akrapovic P-HF841, Инструкция по эксплуатации

Страница: 158 / 167

19 / 36 18 / 36
The Sound Remote Controller can be removed from its hanger by
pressing the side buttons simultaneously (Figure 5).
3. Battery Replacement for the
Sound Remote Controller
3.1 Unscrew the housing screws and open the Sound Remote
Controller housing. Carefully remove the battery by offsetting the
marked battery holder pin (Figures 6 and 7). Tool: Use a small
PH000 screwdriver
NOTE: Make sure to insert the new battery correctly! Check the battery
polarity (type: Lithium CR2032 3V). Use ONLY disposable brand-named
CR2032 3V lithium coin cell batteries in the Sound Remote Controller.
NEVER use rechargeable coin cell batteries or other battery types
– Risk of explosion if battery is replaced by an incorrect type.
3.2 After inserting the new battery, carefully snap the housing
back together, aligning the side buttons as indicated, and close the
housing. Tighten the screws as indicated (Figure 8).
Figure 5
Figure 6 Figure 7
Figure 8