Scope
6 (16)
Sesam 800 K3 RXDIN USA Manual
Document-ID: 946415-000
Version: A0
Author: SH
2.2
Warnings
1. Read this manual carefully before operating and installing this product.
2. Due to the complex nature of equipment, it is necessary to read the entire
manual before installation.
3. Only authorized personnel should service this equipment. Unauthorized
work on this unit will void the warranty.
4. This manual is for reference only; please call your distributor or
Åkerströms Björbo if further assistance is required.
5. The equipment has been tested for correct operation before delivery from
the factory. However, it must not be used in critical or hazardous operation
where incorrect operation may cause personal or equipment damage.
6. After daily operation, a secure storage space should be designated for the
transmitter unit especially when not in use.
7. Transmitter should be placed in a safe place when not in use to avoid ac-
cidental pressing of buttons.
8. The equipment should be equipped with all required safety devices as dic-
tated by CMAA, OSHA, or all other applicable governing regulations.
9. Ensure transmitter batteries are in good condition and power for receiver is
correct.
10.
Installation and maintenance should be done only while the crane/ma
-
chine’s main power and receiver’s power are off and locked out to prevent
electrical shock.
11. Contents of the manual may be amended by the manufacturer without
notice.
