Scope
4 (16)
Sesam 800 K3 RXDIN USA Manual
Document-ID: 946415-000
Version: A0
Author: SH
2.1
Safety Considerations
1. The safety guidelines in this manual are not intended to replace any rules
or regulations or any applicable local, state, or federal governing laws.
The following information is intended to be used in conjunction with other
rules or regulations already in existence. It is important to read all safety
information before operating any wireless radio remote control system.
2. Only properly trained persons designated by management should be
permitted to operate wireless radio controlled equipment. Wireless radio
controlled equipment should not be operated by any person who cannot
read or understand signs, notices and operating instructions that pertain to
the equipment.
3. Wireless radio controlled equipment should not be operated by any person
with insufficient eyesight or hearing or by any person who may be suffer
-
ing from a disorder or illness or is taking any medication that may impair
judgment or the ability to operate equipment.
4. Ensure transmitter batteries are in good condition and power for receiver
is correct. Installation and maintenance should be done only while the con
-
trolled equipment main power and receiver’s power are off and locked out
to prevent electrical shock.
5. Any person operating wireless radio controlled equipment should possess
the following knowledge and/or skills:
•
Knowledge of hazards particular to the equipment being operated
•
Knowledge of safety rules for radio controlled equipment
•
Knowledge of the radio transmitter
•
Proper clearance of all moving parts on the radio controlled equipment
•
Proper storage space for radio control transmitter when not in use
•
Transferring radio control transmitter to another person
•
Reporting unsafe or unusual operating conditions
•
Remote controlled equipment capacity and limitations
•
Procedures for testing controlled equipment
6. The Sesam remote control system is recommended for the remote opera-
tion of door opening equipment only. This unit is not intended for use on
material handling, people moving or any other critical application.
