Replacing batteries in the transmitter
14 (16)
Sesam 800 K3 RXDIN USA Manual
Document-ID: 946415-000
Version: A0
Author: SH
10
Replacing batteries in the transmitter
10.1
Replacing batteries in Sesam K3
If the indication LED on the transmitter indicates low battery, replace the batter
-
ies promptly. Before changing the batteries note that changing of batteries must
take place in a clean environment free from static electricity.
The batteries are changed as follows:
1. Open the battery cover by unscrewing the 3 screws on the backside of the
transmitter housing (see fig. 5).
2. Carefully remove the cover.
3. Remove the batteries.
4.
Insert the new batteries (see fig. 6 and 7).
5. Close the cover.
6. Tighten the 3 screws with PH00 (torque 0,14 Nm).
Figure 5.
Battery cover
Figure 6.
Insert the batteries in the
transmitter
Figure 7.
Batteries in its correct
position
