Akerstroms AQ80, Руководство по установке, Страница: 25 / 48

Commissioning 25 (48)
Installation manual Remotus Jupiter 10BD, Era 4/6/8B FSK16 Version: B0 Document-ID: 954045-000 EN Author: SH
7.5.1 Multi-operator operation
2 transmitters and 1 receiver
In order to run multi-operator operation the receiver must be paired with two ID’s. First paired transmitter = transmitter 1.
1. Pair transmitter 1 to the receiver. Disconnect and reconnect the power source to the receiver.
2. Pair transmitter 2 to the receiver. Disconnect the power source to the receiver, set the SW3 in “during op-
eration” and reconnect the power source to the receiver
A
1 2
During pairing During operation
Receiver A
A
Transmitter 1
1
ON
1 2 3 4
SW3:1 OFF, SW3:3 OFF
ON
1 2 3 4
SW3:1 ON, SW3:3 OFF
Transmitter 2
2
ON
1 2 3 4
SW3:1 ON, SW3:3 OFF
7.5.2 Tandem operation
1 transmitter and 2 receivers
In order to run tandem operation the receivers must be paired with the same ID.
1. Pair the transmitter to receiver 1 (A). Disconnect the power source to the receiver, set the SW3 in “during
operation” and reconnect the power source to the receiver.
2. Pair the transmitter to receiver 2 (B). Disconnect the power source to the receiver, set the SW3 in “during
operation” and reconnect the power source to the receiver.
During pairing During operation
B A
1
Receiver A
A
Transmitter 1
1
ON
1 2 3 4
SW3:1 OFF, SW3:3 OFF
ON
1 2 3 4
SW3:1 ON, SW3:3 OFF
Receiver B
B
ON
1 2 3 4
SW3:1 ON, SW3:3 OFF
ON
1 2 3 4
SW3:1 ON, SW3:3 ON