manualshive.com logo in svg

Akerstroms AQ80, Руководство по установке, Страница: 20 / 48

Поделиться
Скачать
Akerstroms AQ80 Скачать руководство пользователя страница 20

Commissioning 

20 (48)

 Installation manual Remotus Jupiter 10BD, Era 4/6/8B FSK16    Version: B0     Document-ID: 954045-000 EN    Author: SH

7.2.5  Adjustment of the Push Buttons Remaining and Momentary Functions

The buttons either have momentary functions, which give a signal for only as long as you keep pressing, 

or remaining functions.

Note that this function needs support from the receiver PLC. Before changing these parameters, 

check the program options. Only qualified personnel may make these changes.

1.   Enter the configuration menu.
2.  Then select “Button function” with bottom right button (browse with top buttons).
3.  Press down the buttons for which you want to have a remaining/momentary function. Lighted but-

ton LED indicates remaining function.  

Note: 

The three pair of buttons 1-2, 3-4 and 5-6 must have 

the same settings within the pair. For 10BD must also buttons 7-8 have the same settings within 

the pair. Otherwise the momentary function is disabled on the button that is not remaining.

4.  Restart the transmitter.

 

7.2.6  Radio communication power

To change the settings do the following:

1.  Enter the configuration menu.
2.  Then select “Radio comm power”

; with bottom right button (browse with top buttons).

3.  Then browse to the desired setting with top buttons:

•  “100 % power”
•  “25 % power”
Already selected setting is indicated by top left button LED.

4.  Select setting by press down bottom right button.
5.  Automatic return to the main menu or restart the transmitter.

Browse

Choose 

/OK

Browse

Back

Choose 

/OK

Browse

Browse

Back

Содержание AQ80

















































Отзывы:

Нет отзывов