manualshive.com logo in svg

Akerstroms AQ80, Руководство по установке, Страница: 16 / 48

Поделиться
Скачать
Akerstroms AQ80 Скачать руководство пользователя страница 16

Commissioning 

16 (48)

 Installation manual Remotus Jupiter 10BD, Era 4/6/8B FSK16    Version: B0     Document-ID: 954045-000 EN    Author: SH

7.2 

Transmitter configuration mode

Enter configuration menu 

Press the button on the bottom right (2

nd

 step) while 

pulling up the safety stop button. Hold down the 

button 3 seconds until the status indicator glows yel-

low showing that the transmitter is in configuration 

mode.

Submenu

Browse submenu with the top buttons. Choose sub-

menu with the button on the bottom right. To return 

to the main menu while you are in a submenu, press 

the button on the bottom left.
Submenus: 

•  “Shutdown”
•  “PIN-code”
•  “Frequency”
•  “433 MHz”
•  “Button function”
•  “Radio comm power”
•  “Remote type”
•  “Heavy weight PIN-code”
•  “System info”

Exit/Save

Finish by turning the transmitter off by pushing the 

safety stop button down. This also saves the changes 

that have been made.

Enter config menu

Browse

Choose 

/OK

Browse

Configuration menu

Choose 

/OK

Browse

Browse

7.2.1  Shutdown Time of the Transmitter

The transmitter shuts down automatically if not used for a certain amount 

of time. This time can be adjusted in the transmitter configuration menu.

1.  Enter the configuration menu. 
2.  Then select “Shutdown”; 

with bottom right button (browse with top buttons)

.

3.  Then browse the desired shutdown time with top buttons:

•  “2 minutes”
•  “5 minutes”
•  “15 minutes”
•  “no shutdown”
Already selected shutdown time is indicated by top left button LED.

4.  Select shutdown time by press down bottom right button.
5.  Automatic return to the main menu or restart the transmitter.

Browse

Choose 

/OK

Browse

Back

Shutdown time

Choose 

/OK

Browse

Browse

Back

Содержание AQ80

















































Отзывы:

Нет отзывов