Commissioning
15 (48)
Installation manual Remotus Jupiter 10BD, Era 4/6/8B FSK16 Version: B0 Document-ID: 954045-000 EN Author: SH
7
Commissioning
7.1
Frequency setting
Fixed frequency channel set by the user. It´s only in the transmitter the frequency need to be set, see sec-
tion 7.2.3 on page 18.
Note that for 433MHz region “EU” or “Other” is set in both the transmitter and the receiver. For the
receiver refer to Configuration Tool (manual 952576-000) and for the transmitter see 7.2.4 on page 18.
Default setting is “EU”.
7.1.1 Indication of radio channel quality in Receiver RX161
By watching the indications “Squelch” (LED 4) and “Message received” (LED 3) it is possible to diag-
nose the quality of the radio channel (see section 9.1 on page 30).
• Every time a message is received the indication “Squelch” lit. The messages are sent at a constant
rate. The indication “Squelch” shall lit at this rate. If this isn’t the case some of the channels can be
occupied or some of the used frequencies (1 of 15) are not working.
• If the message is accepted by the receiver, indication “Message received” will lit.
If the indication “Message received” does not lit at the same rate as the indication “Squelch” the messages
on one or more frequencies are disturbed or distorted.