background image

OG-X-FR openGear Frame v1.0r1 51 www.aja.com

 

Warning! Refer all servicing to qualified service personnel. Servicing is required 

when the device has been damaged in any way, such as power-supply cord or 

plug is damaged, liquid has been spilled or objects have fallen into the device, 

the device has been exposed to rain or moisture, does not operate normally, or 

has been dropped.

Avertissement! Référez-vous au personnel de service qualifié pour tout entretien. 

L'entretien est exigé quand l'appareil a été endommagé de quelque manière 

que ce soit, par exemple lorsque le cordon d'alimentation ou la prise sont 

endommagés, que du liquide a été versé ou des objets sont tombés dans 

l'appareil, que l'appareil a été exposé à la pluie ou à l'humidité, ne fonctionne pas 

normalement ou est tombé.

Warnung! Das Gerät sollte nur von qualifizierten Fachkräften gewartet werden. 

Eine Wartung ist fällig, wenn das Gerät in irgendeiner Weise beschädigt wurde, 

wie bei beschädigtem Netzkabel oder Netzstecker, falls Flüssigkeiten oder 

Objekte in das Gerät gelangen, das Gerät Regen oder Feuchtigkeit ausgesetzt 

wurde, nicht ordnungsgemäß funktioniert oder fallen gelassen wurde.

¡Advertencia! Consulte al personal calificado por cuestiones de reparación. El 

servicio de reparación se requiere cuando el dispositivo ha recibido cualquier 

tipo de daño, por ejemplo cable o espigas dañadas, se ha derramado líquido o 

se han caído objetos dentro del dispositivo, el dispositivo ha sido expuesto a la 

lluvia o humedad, o no funciona de modo normal, o se ha caído.

Aviso! Remeta todos os serviços de manutenção para o pessoal de assistência 

qualificado. A prestação de serviços de manutenção é exigida quando o 

dispositivo foi danificado mediante qualquer forma, como um cabo de 

alimentação ou ficha que se encontra danificado/a, quando foi derramado 

líquido ou caíram objectos sobre o dispositivo, quando o dispositivo foi exposto 

à chuva ou à humidade, quando não funciona normalmente ou quando foi 

deixado cair.

Avviso! Fare riferimento al personale qualificato per tutti gli interventi di assistenza. 

L'assistenza è necessaria quando il dispositivo è stato danneggiato in qualche 

modo, ad esempio se il cavo di alimentazione o la spina sono danneggiati, è 

stato rovesciato del liquido è stato rovesciato o qualche oggetto è caduto nel 

dispositivo, il dispositivo è stato esposto a pioggia o umidità, non funziona 

correttamente o è caduto 

Warning! Do not open the chassis. There are no user-serviceable parts inside. 

Opening the chassis will void the warranty unless performed by an AJA service 

center or licensed facility.

Avertissement! Ne pas ouvrir le châssis. Aucun élément à l’intérieur du châssis 

ne peut être réparé par l’utilisateur. La garantie sera annulée si le châssis est 

ouvert par toute autre personne qu’un technicien d’un centre de service ou d’un 

établissement agréé AJA.

Warnung! Öffnen Sie das Gehäuse nicht. Keine der Geräteteile können vom 

Benutzer gewartet werden. Durch das Öffnen des Gehäuses wird die Garantie 

hinfällig, es sei denn, solche Wartungsarbeiten werden in einem AJA-Service-

Center oder einem lizenzierten Betrieb vorgenommen.

¡Advertencia! No abra el chasis. El interior no contiene piezas reparables por el 

usuario. El abrir el chasis anulará la garantía a menos que se lo haga en un centro 

de servicio AJA o en un local autorizado.

Advertência! Não abra o chassi. Não há internamente nenhuma peça que permita 

manutenção pelo usuário. Abrir o chassi anula a garantia, a menos que a abertura 

seja realizada por uma central de serviços da AJA ou por um local autorizado.

Avvertenza! Non aprire lo chassis. All’interno non ci sono parti riparabili 

dall’utente. L’apertura dello chassis invaliderà la garanzia se non viene effettuata 

da un centro ufficiale o autorizzato AJA. 

Содержание OG-X-FR

























































Отзывы: