OG-X-FR openGear Frame v1.0r1 36 www.aja.com
3. Enter the new name for the OG-X-FR frame in the text field provided.
To re-name an auto-detected OG-X-FR frame
1. Right-click the OG-X-FR frame you wish to rename.
2. Select Open. The interface for the Network Controller Card displays in the
DashBoard window.
In the following example, the interface for an MFC-OG3-N displays.
3. Select the Network tab.
4. Enter a new name for the OG-X-FR frame in the Frame Name field.
5. Press Enter.
6. Click Apply.
Removing an OG-X-FR Frame from the Tree View in
DashBoard
This section outlines how to remove an OG-X-FR frame from a Tree View in
DashBoard. Once a frame is removed, DashBoard no longer reports the status
in the Tree View and you are no longer able to monitor or control the affected
devices. If communication with a frame is disconnected via the Disconnect
option, the status indicator is light gray until the frame is re-connected. If the
status indicator is dark gray, with the rest of the node displaying as normal, a
connection cannot currently be established to the device.
NOTE: If the OG-X-FR frame you are removing is in a Custom Folder, you must first delete
the frame from the Custom Folder before it can be removed from the Tree View.
To remove an OG-X-FR frame from the Tree View
1. Right-click the OG-X-FR frame you wish to remove.
2. Select
to remove the OG-X-FR frame from the Tree View.