AJA io hd, Инструкция по установке и эксплуатации

Страница: 46 / 110

36
You can even access the AJA Control Panel application without exiting the
application by first holding down the command key (Apple key) before mouse
clicking on the AJA Control Panel application on the desktop.
For this reason, it is useful to leave the AJA Control Panel application on the
desktop while you work in applications and simply command click into it to
access it if you are unsure of a setting or wish to make a change.
Control Panel
Basics Although the Io HD auto-detects the input format depending on the input
presented, and the Control Panel intuitively shows at a glance much about what
the Io HD is doing—there is even more information presented that may not be
obvious. To ensure you make the most of the software, run the AJA Control Panel
application and look at its display. Then refer to the “Basics” described here to
better understand what you're seeing and learn how to view and change the Io
HD system configuration.
Before we go into too much detail, here are some basic definitions you should
know (please refer to the figure that follows for reference). After studying the
basics, read “
Who is Controlling Io HD ?” later in this chapter for more advanced
information on how applications interact with the Io HD.
Tabbed Screens —the bottom area of the AJA Control Panel provides different
information categorized by topic. Clicking on one of the “Tab” items from
the left navigation column will result in an information screen corresponding
to that tab’s topic. Each of these tabbed windows are described on the
following pages.
Tabs screens available are:
Control: configures Io HD default output (test pattern, pass through, desktop,
etc.) plus setting genlock and output timing.
Format: select the framebuffer primary video format, any secondary.
formats, and parameters of up/down/crossconversion for input/output.
Input Select: view and edit input selections and how they are mapped.
SDI Output: assign outputs to either Primary or Secondary formats.
HDMI: configure the HDMI input and output
Analog Output: configure the component/comY/C analog output.
Video Setup: configures Video options such as composite black level.
Audio Setup: configures analog audio monitor level and delay.
Conversion: used to select codec options such as whether paused video
appears as a full frame or a single field (jitter shown or not shown) and 24
to 30 fps padding patterns.
Timecode: monitor RP-188 timecode and configure timecode window burn
output ( Note: SMPTE 12M-2 is the updated name and specification for
what was RP-188)
Timelapse: enables the capture of select frames over a specified time interval.
IoHD: allows you to store the current state of the IoHD as a preset that can be
recalled. This provides the ability of storing numberous “canned” presets
for differing applications. This screen also is used to configure the front”
panel LED display.
Info: displays status information about the Io HD. This information is
generally intended for troubleshooting and support.