AJA io hd, Инструкция по установке и эксплуатации

Страница: 19 / 110

1
11
Io HD Installation and Operation Manual — Front Panel
Although the default is to show Primary and Secondary formats, you can instead
configure the Io HD to show the Primary format on the top line of the display
and the currently configured timecode on the second line. If in an input mode,
this will display the timecode at input. If set for play out, then the timecode
display is what is output. If you see a semi-colon in the timecode display, then it
means the timecode is drop-frame. If all colons, then it’s non-drop frame.
See Chapter 5, Io HD LED Display under the IoHD Screen topic.
LED Indicator
Descriptions Indicators on the front panel are LEDs that illuminate when a condition is
present. The following indicators are conveniently arranged in groups to show
specific subjects:
•
Power and Status LEDs—Blue LEDs to the right and left of the
alphanumeric/graphics display
•
Audio VU LEDs—Green, yellow, and red LEDs located underneath the
alphanumeric/graphics display
Each group of indicators are discussed below.
Power and Status LED Indicators
Power —shows that Io HD is connected to AC mains power and that the power
switch on the rear panel has been turned on.
FireWire—shows Io HD has an active data communications link over the
FireWire connection with a host computer.
Video —shows that a valid video source has been detected.
Ref —shows that the panel has an external reference video source applied
(Genlock). Please refer to the “ Genlock and Your System ” topic in Chapter 4
for additional information on the use of this connector and the effect of
Genlock/External Reference sources on the system.
Timecode display
(; = drop frame := non-drop frame)
Primary video format and source
Front Panel Display
P 1080i29.97 SDI
VITC1 01:00:07;02