background image

 

1

 

5

 

Io HD Installation and Operation Manual — System Requirements

 

Please save the Io HD shipping box and all packaging materials. If you ever require 
service or want to move your system—use the packaging materials and box for safe 
shipment.

 

System Requirements

 

AJA Video recommends that your system meet minimum hardware and software 
requirements to achieve a satisfactory level of performance. Here, we provide 
minimum and recommended requirements and then discuss disk storage issues that 
should be understood for proper system configuration.

 

Recommended 
System and 
Software 
Requirements

 

The following table outlines the system hardware and software needed.

 

Item

Recommended 

 

Recommended Software:

FCP 7.0.x - KONA driver version 9.0.1 (Snow Leopard and 
Leopard OS compatible version)
FCP 7.0.x - KONA driver version 7.5.1 (Snow Leopard and 
Leopard OS compatible version)
FCP 7.0.x - KONA driver version 7.1 (Snow Leopard and 
Leopard OS compatible version)
FCP 7.0.x - KONA driver version 7.0 (Snow Leopard and 
Leopard OS compatible version)
FCP 7.0.x - KONA driver version 6.5 (Leopard OS 
compatible version)
FCP 6.0.x - KONA driver version 6.0.3 (Leopard and Tiger 
OS compatible version)

Macintosh configurations 
supported:

MacPro 2.8GHz (MA970LL/A) or 3.0GHz or 3.2GHz build to 
orders
2GB or more of RAM

MacPro 2.66GHz (MA356LL/A) or 2.0GHz or 3.0GHz build 
to orders
2GB or more RAM

MacPro 2.66Ghz 8 core (MA356LL/A) or 2.0GHz or 3.0GHz 
build to orders
2GB or more RAM

MacBook Pro
2GB or more of RAM
ExpressCard/34 FireWire 800 card or
ExpressCard/34 Sata Controller

Power Mac G5 Quad 2.5GHz (M9592LL/A)
2GB or more RAM

 

Note:

 

 unlisted Macintosh G5 configurations may not provide 

the full functionality or features that the Io HD in combination 
with the listed configurations (in this table) can provide.

Intel XServe Quad 2.0Ghz (MA409LL/A)
2GB or more of RAM

Internal Storage (SATA inside 
Mac):

Desktop configurations only.

External Storage:

 

Note:

 

 see Storage Methods 

topic that follows later in this 
Chapter

Ideally a RAID configuration with Fibre Channel or SCSI 
connection to the Mac via qualified host bus adapter

Содержание io hd















































































































Отзывы: