manualshive.com logo in svg

AJA io hd, Инструкция по установке и эксплуатации

Поделиться
Скачать
AJA io hd Скачать руководство пользователя страница 23

1

15

Io HD Installation and Operation Manual — Rear Panel

A Note About YPbPr

—Component Video, or YPbPr, has been given several names 

over time. YUV, Y/R-Y/B-Y, and YCbCr, are just some examples. Although these 
various formats have some differences in levels, they are all basically the same. Io 
HD uses the modern YPbPr terminology exclusively. Io HD supports three 
different types of YPbPr: SMPTE/EBU N10, Betacam (NTSC), and Betacam 
(NTSC Japan). These three formats differ in level only and are configured in 
Final Cut Pro within the 

Audio/Video Settings

 and/or via the AJA Control Panel 

application.

S-Video (Y/C)

S-Video 4-pin mini-DIN connectors provide for connection of desktop 
video/pro-sumer level equipment, including camcorders, VCRs/VTRs, and 
monitors—to name a few. Use high quality shielded S-Video cables when 
making connections. S-video signals are converted internally to 10-bit 
digital.

Composite NTSC/PAL

BNC connectors support composite NTSC or PAL input and output. 
Connect an NTSC or PAL composite video cable from a VTR, Camera, or 
other source to the CPST in BNC. Then connect the CPST Out BNC to a 
monitor, or other Composite video device. Composite video signals are A/D 
(input) and D/A (output) converted (10-bit).

Reference Video (looping)

These two BNC connectors allow you to synchronize Io HD outputs to your 
house reference video signal (blackburst or composite sync for SD, or Tri-
level for HD). 

HDMI

Two HDMI connectors provide for input and output of HDMI 
compatible video (version 1.1) and multi-channel (8) embedded 
audio. HDCP is not supported on either input or output. Io HD’s 
HDMI output does not have HDCP, and input sources having HDCP are not 
supported. The HDMI input is designed to support long cable runs: 
up to 100 ft when using 22 or 24AWG HDMI cable, or up to 50 ft using 28 or 
30AWG HDMI cable. The HDMI output supports standard HDMI cables only.

Formats supported (video only):

525i, 625i, 720p 50/59.94/60, and 1080i 50/59.94/60 are supported on input 
and output.

1080p23.98, 1080p24, 1080p25, 1080p29.97, and 1080p30 are supported for 
output only.

The Io HD control panel allows selection and adjustment of some HDMI 
parameters; please see Chapter 5—Io HD and Final Cut Pro for more information on 
Control Panel operation.

Содержание io hd















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды