AJA FS3 Скачать руководство пользователя страница 8

Страница: 8 / 108

FS3 Frame Synchronizer/Converter v1.1r1 8

www.aja.com

• Looping reference input with flexible genlock.

Audio Features

• Embedded SDI audio (up to 64 in/out), with flexible audio routing. Any or

all embedded audio inputs can be directed to any or all embedded audio

outputs. The same embedded audio is carried on the mirrored video outputs.

• Level and Phase, controls for every audio channel, and Delay controls for all

SDI audio channel pairs.

• 5.1 and 7.1 mix down to stereo.
• Supports pass-thru of synchronous non-PCM audio (Dolby E, Dolby D, etc).

Other Features

•  Built-in front panel control via scrolling alphanumeric and graphical menu.
•  Front panel LED status indicators for at-a-glance system monitoring.
•  Linux operating system supporting full network compatibility, including Web-

based remote control over 10/100/1000 Ethernet via an internal web server.

• Two fully redundant power supplies standard.
• Five-year international warranty with unlimited technical support.

FS3 Control

FS3 operation can be monitored and changed in a number of ways. Feature sets

in each of the control methods vary, although the front panel and web browser

interfaces offer many of the same features.

Front Panel Control

The FS3 front panel offers the most direct control, ideal for use in machine rooms

or wherever quick changes and status checks must be made. The buttons and

knobs control menus in the display, allowing you to fully configure the system

according to your purposes. You can control inputs, outputs, processing paths,

keying, and much more.

Remote Web Browser Control

The FS3 internally contains an optimized web server that allows remote

monitoring and parameter setting via an Ethernet 10/100/1000 network-attached

computer running a web-browser. Networks can be closed local area networks,

a direct computer-to-FS3 cross-over cable, or for greatest flexibility, exposed

through a firewall to a broadband WAN. From a network-connected computer

you can communicate with one or more FS3 devices, even getting them to

identify themselves via LEDs on the front and rear panel.

GPI Inputs and Outputs

General Purpose Inputs and Outputs are available on the FS3 back panel to

provide contact closure control. Using the inputs, an external contact closure

activates a specified function on the FS3. Using the outputs, specific FS3 functions

can produce a contact closure to activate any desired function on external

equipment. The functions to be activated by an input or that can activate an

output are set using the front panel and browser menus.

Содержание FS3













































































































Результаты поиска

Содержание FS3

Отзывы:

AJA FS3, Инструкция по установке и эксплуатации, Страница: 8 / 108

Результаты поиска

Содержание FS3

Отзывы: