AJA FS3 Скачать руководство пользователя страница 26

Страница: 26 / 108

FS3 Frame Synchronizer/Converter v1.1r1 26 www.aja.com

NOTE: The IP address reported on the CONFIG menu is a database entry, which

occasionally may not be the address the unit is using. The STATUS menu always

shows the correct value.

4. At the Mac terminal prompt, enter ping and the IP address noted above. For

example: ping 192.168.0.2

5. If successful, the ping utility will respond that packets were sent, received

and how long it took. For example:

64 bytes from 192.168.0.2: icmp_seq=0 ttl=64 time=0.590 ms

6. If unsuccessful, check the FS3 network settings and resolve the problem

with your IT administrator.

Windows PC Ping Procedure

1.  From the Start button, select the All Programs menu.
2.  Select Accessories/Command Prompt from the All Programs list.
3.  On the FS3, select the STATUS button and go to System Status menu (with

the FS3 name) to read the unit’s currently configured IP address.

4. In the PC Command Prompt utility, enter ping and the IP address noted in

step 3. For example: ping 192.168.0.2

5. If successful, the ping utility will respond that packets were sent, received

and how long it took. For example:

64 bytes from 192.168.0.2: icmp_seq=0 ttl=64 time=0.590 ms

6. If unsuccessful, check the FS3 network settings and resolve the problem

with your IT administrator.

Web Browser Control

To control the FS3 from a web browser on a network attached computer, enter

the FS3 IP address as a URL in the browser. For example, if the FS3 IP address were

“90.0.6.31”, you would then type into the web browser: http://90.0.6.31. This topic

is explained in greater detail in Chapter 5: Browser Remote Control.

NOTE: The web UI (browser GUI) will keep up with most changes initiated at the front

panel. However, the web UI may not reconnect (displays “Disconnected”) when

network changes are initiated at the FS3 front panel. To manually reconnect,

type the new IP address into the browser, or click the browser Refresh button.

Sometimes the browser caches the old FS3 address. If you can’t get the browser

to connect, try clearing the Browser history to clear the cache, and then enter the

new address again.

Software Update Installation

Although the FS3 comes from the factory pre-installed with software, it may not

be as up-to-date as software posted on our AJA website. This topic describes the

steps required to update the software in your AJA FS3.

Download the Latest Software

Current and past releases of FS3 software are available on the World Wide Web

from AJA’s website. To get the software, point your browser to the FS3 support

page, which will contain helpful FS3 information and links to the updates.

https://www.aja.com/en/family/fs

Содержание FS3













































































































Результаты поиска

Содержание FS3

Отзывы:

AJA FS3, Инструкция по установке и эксплуатации, Страница: 26 / 108

Результаты поиска

Содержание FS3

Отзывы: