AJA FS3 Скачать руководство пользователя страница 27

Страница: 27 / 108

FS3 Frame Synchronizer/Converter v1.1r1 27 www.aja.com

Once you’re at the update page, you can select FS3 software files to download to

your Mac or PC for upgrading your local FS3 machine.

Unpack the Software

FS3 software update files are “ZIP” files that you can open with a number of

standard and third party file compression applications. The software image that

you’ll install on the FS3 is a file with a name like FS3_ver_1.0.0.0.bin or similar.

NOTE: Depending on your PC or Mac operating system settings, the “.bin” extension

may not be visible to you in a file directory.

Uploading and Installing the Software to the FS3

Uploading and installing the software update requires a PC or Mac that can “see”

the FS3 via its Ethernet connection. Follow this procedure to install the software:
1. Point your browser at the FS3’s upgrade page by clicking on the Firmware

link at the bottom of the navigation box on the left-hand side of any FS3

web page.

Figure 9. Update Firmware Browser Screen

2. Click the Browse... button to find and select the downloaded file. For

example: FS3_ver_1.1.0.1.bin contained in the file downloaded from AJA.

3. Click OK when asked if you want to Upload Firmware. The file uploads to

the FS3 and is tested for validity. Incomplete, corrupted, or non-FS3 files

are rejected. Wait for the procedure to complete—it will take only a few

minutes. Progress bars show upload progress.

4. Click Commit Uploaded Firmware when prompted after the upload is

finished. Progress bars show progress as the file is written to flash memory.

5. Click Restart FS3 with New Firmware to restart the FS3. This will take the

FS3 offline for a minute or two. During the restart, progress is shown in the

connection area in the upper right corner of the FS3 Status screen. After

restart, the FS3 will be running the new software.

6. Once these steps are complete, the FS3 will be running the software, and

the Software Version on the Status screen shows the new version number.

Check that the new software is running by bringing up the FS3 web page

again; the software version is displayed at the top of all FS3 web screens. If

the FS3 did not update successfully, run through the update steps again.

NOTE: The configuration of the FS3 prior to the upgrade is preserved. The unit returns to

service exactly as it was before the upgrade.

Содержание FS3













































































































Результаты поиска

Содержание FS3

Отзывы:

AJA FS3, Инструкция по установке и эксплуатации, Страница: 27 / 108

Результаты поиска

Содержание FS3

Отзывы: