AJA FS3 Скачать руководство пользователя страница 79

Страница: 79 / 108

FS3 Frame Synchronizer/Converter v1.1r1 79 www.aja.com

Hidden Menus

This selection lets you choose whether to hide or show inactive menus.

Hide Inactive (default)

Show All

Hides menus that are not in use.

Shows all menus, even those that are not in use.

Display Intensity

Display Intensity determines alphanumeric display and front panel LED

brightness.

Variable

Use the slider to dim or brighten the alphanumeric display and

activity indicator LEDs in steps from 1 (dim) to 8 (brightest).

Default is 6

UPnP Host

UPnP Host enables the FS3 to be discovered by a Windows network.

Enable (default)

Disable

Enables the FS3 to be discovered by a Windows network.

Disables Windows network discovery of the FS3.

When this parameter is enabled, you can view the FS3 on a Windows Network by

clicking these selections in Windows: Computer > Network (in left pane). Any FS3s

on the network will be listed under Other Devices below Computers and Media

Devices. If your system does not have network discovery enabled, you may need

to enable it following the Windows help instructions to make network devices

visible in the Windows Network window.

UPnP Proxy

UPnP Proxy enables the FS3 to serve as a proxy for other AJA devices, allowing

them to be discovered on a Windows network through the FS3. When enabled,

the FS3 acts as a proxy for all the AJA devices that it is able to connect to that

have not already been discovered on the network. The devices will be listed in the

FS3 Network window. Once the devices appear on the network, they can connect

directly to other devices and computers without involving the FS3.

Enable (default)

Disable

Enables the FS3 to connect other AJA devices to the

network.

Disables the FS3 from serving as a proxy for AJA devices.

Содержание FS3













































































































Результаты поиска

Содержание FS3

Отзывы:

AJA FS3, Инструкция по установке и эксплуатации, Страница: 79 / 108

Результаты поиска

Содержание FS3

Отзывы: