AJA FS3 Скачать руководство пользователя страница 7

Страница: 7 / 108

FS3 Frame Synchronizer/Converter v1.1r1 7

www.aja.com

Chapter 1 – Introduction

Overview

The new FS3 combines AJA’s industry-proven frame synchronization with

high-quality 4K up-conversion technology to seamlessly integrate SD and HD

signals into 4K workflows. AJA’s adaptive scaling algorithms, paired with our

well-known conversion technology ensures your up-converted images will have

the maximum quality possible. You can input SD or HD resolution SDI via BNC

or Fiber, and output up-converted 4K video to multiple BNC and Fiber outputs

simultaneously. FS3 also includes the industry-proven features included in AJA

frame synchronizers such as up, down, cross-conversion of SD, HD, and 3G-SDI

formats, RGB color correction, region of interest scaling, extensive audio controls

and routing, web UI control, GPI triggers and more, making it an extremely

versatile tool that can support a variety of production requirements.
Synchronizing diverse formats is a critical part of a broadcast, mobile or post-

production environment. FS3 syncs to analog SD blackburst, HD tri-level sync, or

to the incoming SDI signal. FS3 also provides integer frame rate conversion (3:2,

1:2, 2:1).
The growth of 5.1 and 7.1 audio has increased the number of audio channels that

must be managed in a production. FS3 accepts embedded SDI audio on all four

SDI inputs (two coax and two optional fiber), and has an internal 64x64 audio

matrix that allows routing of all embedded audio channels. Besides audio level,

phase, and delay controls, FS3 also provides for 5.1 or 7.1 mixdown to stereo.

Video Features

• Video format converter, that accepts SD, HD or 3G SDI video and up-converts

the signal to UltraHD (3840x2160) or 4K (4096x2160), and also up/down/cross

converts SD, HD, and 3G-SDI.

• The FS3 handles a wide variety of video output formats, including 4K/UltraHD

Quadrant (Square Division) and Two Sample Interleave (2SI). See

"FS3 Tech

Specs" on page 89

for a complete list.

• Multiple mirrored outputs: three for Quad SDI, six for Dual SDI, and twelve for

Single SDI.

•  Video proc amp and color correction.
•  Frame synchronizer.
•  User-specified custom format conversion and scaling with variable crop, size,

aspect, position, and Region of Interest parameters.

•  Sidebar keying over black or matte.
•  Closed captioning support.
•  Active Format Description (AFD) support.
•  Reverse Telecine.

Содержание FS3













































































































Результаты поиска

Содержание FS3

Отзывы:

AJA FS3, Инструкция по установке и эксплуатации, Страница: 7 / 108

Результаты поиска

Содержание FS3

Отзывы: