AJA FS3 Скачать руководство пользователя страница 37

Страница: 37 / 108

FS3 Frame Synchronizer/Converter v1.1r1 37 www.aja.com

Power/Temp Alarm Status

This menu shows the power supply status of the FS3 and the temperature status.

If a power supply is unplugged, the display top line indicates PS OFF or PS Error.

Display

Description

PS1 Alarm

Status

PS2 Alarm

Status

TmpAlarm

Status

Displays the state of the PS1 power supply (OK or ERROR).

Displays the state of the PS 2 power supply (OK or ERROR).

Displays a temperature alarm if the FS3 overheats.

Caption Status

This menu shows what type of closed caption data is selected and whether

closed caption data is present on the selected video input.

Display

Description

Vid CC

Caption Type & Presence

Selected caption type (SD/HD/Invalid) and presence

(Detected/Not detected/Pass through).

System Status

This menu shows the FS3’s System Name, IP address and mask, and version

number.

Display

Description

System Name

IP addr

value

IP Mask

value

Version

value

Displays the System Name as set in

Config

menu 1.

Shows the IP address.

Shows the IP mask.

Shows the software version number.

NOTE: The IP parameters shown here on the STATUS menu group System Status menu

are the actual settings of the Ethernet interface, as read from the interface. The

CONFIG menu group IP configuration parameters show the values the FS3 is

supposed to use to configure the interface (they are read from memory). If there is

ever a discrepancy between the two, the STATUS screen is the more correct.

REMOTE Menu Group

The REMOTE Menu Group lets you set up how you want the FS3 to be controlled.

Control options include the front panel, a remote computer running a browser,

and GPI inputs and outputs.

NOTE: The Remote Menu Group parameters available on the front panel interact with

the browser parameters available on an attached computer, and vice versa. For

example, once the Remote Control parameter is set to ‘Local Only’ from either the

browser or front panel, all future settings will only be able to be changed from

the front panel. The opposite is true if set to ‘Remote Only’. However the Remote

Control parameter is always available from the front panel, regardless of how it

is set.

Содержание FS3













































































































Результаты поиска

Содержание FS3

Отзывы:

AJA FS3, Инструкция по установке и эксплуатации, Страница: 37 / 108

Результаты поиска

Содержание FS3

Отзывы: