Aituo AM121 Series, Руководство пользователя

Страница: 28 / 28

Shenzhen Aituo Automation Device Co.,Ltd
28
7
、
Adjust soldering location:manually adjust the soldering location,adjust the soldering
forwarding location,make the upper and bottom claw to the right place,then tight the air
cylinder nut.
8
、
Adjust soldering,feeding tin wire location and length:adjust the height of soldering gun
move down to the right place,to make the length of feeding tin wire can cover the soldering
point of connector,and the tin wire just on the center down of the soldering iron head.And
open the soldering station,to make the temperature to the
350
℃
to 420
℃
,pls try manul soldering or
semi-automatic soldering,and check the temperature is ok or not.
9
、
Testing soldering:As the actual situation to adjust each part location and the parameters.