Shenzhen Aituo Automation Device Co.,Ltd
19
图
2
Picture 3
3
Check whether the nut on the top of solder iron move down air cylinder is loose or not,if
yes,adjust the air cylinder stroke to the proper position,and then tighten this nut(as follow picture
4)
Picture 4
Adjust the two nuts to make the solder
wire from the feeding tin mouth on the
bottom center of solder iron.
Feeding tin mouth
Adjust the nut
and tighten.
Содержание AM121 Series
Страница 13: ...Shenzhen Aituo Automation Device Co Ltd 13...